Polymix

Extensive range of adhesive, sealants, foams and resins designed for industry, marine and automotive aftermarket

Dedicated to treatment and care of cows feet

Adhesives, resins and pads dedicated to treatment and care of equine hooves

PL. 3001.050
PL. 3001.200
1,7 fl oz – 50ml
6,76 fl oz – 200ml
Clear
Working time: 35 seconds
Sanding time: 15 minutes
Painting time: 40 minutes
Two part urethane adhesive with a ultra fast gel and curing time. Can be used for general purpose gluing or to hold part in position.

PL. 3002.050
PL. 3002.200
1,7 fl oz – 50ml
6,76 fl oz – 200ml
Black
Working time: 1 minute
Sanding time: 20 minutes
Painting time: 1 hour
Two part urethane plastic repair structural adhesive to repair any kind of plastic part. One minute working time makes this product suitable for small size repairs.

PL. 5001.050
PL. 5001.200
1,7 fl oz – 50ml
6,76 fl oz – 200ml
Grey/Ochre
Working time: 15 minutes
Painting time: 30 minutes
Self-Leveling Seam Sealer is a two component urethane seam sealer used to match the OEM seams for trunk seams, drip rails, roof seams and core supports.

PL. 5005.050
PL. 5005.200
1,7 fl oz – 50ml
6,76 fl oz – 200ml
Grey/Ochre
Working time: 15 minutes
Painting time: 30 minutes
Two part urethane for use in vertical or horizontal seams to match OEM sealers applied in rectangular shaped beed. Non-sagging, non-flowing. To be used to re-create the sprayed and brushed effect.

PL. 5003.050
PL. 5003.200
1,7 fl oz – 50ml
6,76 fl oz – 200ml
Grey/Ochre
Working time: 15 minutes
Painting time: 30 minutes
Two part urethane non-sag seam sealer duplicates a factory appearance on truck bed seams, tooled door skin seams, floor pan seams, core support seams. To be used to re-create the sprayed effect.

PL. 6002.050
PL. 6002.200
6,76 fl oz 200ml
Black
Working time: 20 minutes
Sanding time: 5 hours
Painting time: 8 hours
Two part urethane used to bond steel and aluminum . The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins.

PL. 6001.050
PL. 6001.200
6,76 fl oz 200ml
Black
Working time: 1 hour
Sanding time 8 hours
Painting time: 12 hours
Two part urethane used to bond steel and aluminum . The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins.

PL. 7002.050
PL. 7002.200
1,7 fl oz – 50ml
6,76 fl oz – 200m
Grey
Painting time: 1 hour
Two part urethane which foams in place to fill posts, pillars, and automotive body cavities. Grey color soft
density.
Chemical base: PU
Cream time: 5 sec
Colour: grey
Density: 1,25
Viscosity: liquid

PL. 7001.050
PL. 7001.200
1,7 fl oz – 50ml
6,76 fl oz – 200ml
Painting time: 1 hour
Two part urethane which foams in place to fill posts, pillars, and automotive body cavities. White color hard density.
Chemical base: PU
Cream time: 5 sec
Colour: white
Density: 1,25
Viscosity: liquid