MSDS Cow Block Adhesive

16 file(s) 0

Download

TDS Cow Block Adhesive

7 file(s) 0

Download

L'articolo Cow Block Adhesive proviene da INCHIMICA.

Working time: 22 seconds (at 20° C)
Bonding time: 2 minutes
Capacity: 178-200ml (depends on cartridge type)
Shelf life: 12 months from manufacturing date (upon correct storage) Storage temperature: 20-30° C
Application Temperature: 18-30° C

L'articolo Cow Block Adhesive WF proviene da INCHIMICA.

Working time: 30 seconds at 20°C (68°F)
Colour: White

Before applying the product it is important to clean and degrease the hoof properly by means of some ether or brake cleaner.

Shelf life: 12 months

Cartridge opening: break the sealing cap by hand. No need for specific tools. Open and partially used cartridges storage recommendations:
Cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.

Storage temperature: 20°C- 30°C.

If the external temperature is lower, the cartridge can be placed with original plastic packaging in hot water for some time.
Viceversa in case external temperature is warmer, cartridge can be placed with original packaging inside cold water.
The chemical reaction between the two components can reach the exothermic temperature of 70°C. It is recommended to use disposable gloves.

Shelf life: 12 months

MSDS Ultra Fast Hoof Bond & Repair

16 file(s) 0

Download

TDS Ultra Fast Hoof Bond & Repair

7 file(s) 0

Download

L'articolo ULTRAFAST proviene da INCHIMICA.

Working time: 45 seconds at 20°C (68°F)

Colour: black or transparent

Before applying the product, it is recommended to clean and degrease the hoof by using ether or brake cleaner.

Cartridge opening: it is sufficient to break the cartridge cap by the hand, no need for specific tools.

Product storage temperature: 20°C- 30°C.

In case external temperature is lower, the cartridge can be placed with original plastic packaging in hot water for some time. Viceversa in case external temperature is warmer, cartridge can be placed with original packaging inside cold water.

If the cartridge has been partially used, the used mixer can be kept on the car- tridge and cut at 3 cm minimum height. The existing dry product inside the mixer will preserve the product inside the cartridge. The chemical reaction between the two components can reach the exothermic temperature of 70°C. it is recommended to use disposable gloves.

Shelf life: 12 months

MSDS Hoof Bond & Repair

32 file(s) 0

Download

TDS Hoof Bond & Repair

14 file(s) 0

Download

L'articolo HOOF BOND & REPAIR proviene da INCHIMICA.

Working time: 45 seconds at 20°C (68°F)

Colour: transparent

PAD CS promotes the hoof wall growth and provides good foot support.
It has the same hardness as HOOF PAD (Shore 60 A), and is enriched with cop- per sulphate. This ingredient can be acknowledged by its blue color and provides therapeutic advantages.
It has an antibacterial effect and can be on problems like foot hygiene, necrosis or anthill for example. It can also be used as a preventative at certain times of the year or for horses living in humid or very dry environments.
Equimix pour-in pads have very good compatibility to one another and offer a wide range of applications for fixing foot diseases.

Cartridge opening: break the sealing cap by hand. No need for specific tools. Open and partially used cartridges storage recommendations:

Cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.

Storage temperature: 20°C- 30°C.

If the external temperature is lower, the cartridge can be placed with original pla- stic packaging in hot water for some time. Viceversa in case external temperature is warmer, cartridge can be placed with original packaging inside cold water. The chemical reaction between the two components can reach the exothermic tem- perature of 70°C. It is recommended to use disposable gloves.

Shelf life: 12 months

MSDS Hoof Pad CS

16 file(s) 0

Download

TDS Hoof Pad CS

7 file(s) 0

Download

L'articolo HOOF PAD CS proviene da INCHIMICA.

Working time: 45 seconds at 20°C (68°F)
Colour: transparent

Easy to apply, it has good results on small horses as well as heavy ones. Thanks to its hardness and very good adhesion to the hoof, it can also be applied without pad or mesh. It guarantees very good shock absorption.

Shelf life: 12 months

Equimix pour-in pads have very good compatibility to one another and offer a
wide range of applications for fixing foot diseases.

Cartridge opening: break the sealing cap by hand. No need for specific tools. Open and partially used cartridges storage recommendations: cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.

Storage temperature: 20°C- 30°C.

If the external temperature is lower, the cartridge can be placed with original pla- stic packaging in hot water for some time. Viceversa in case external temperature is warmer, cartridge can be placed with original packaging inside cold water. The chemical reaction between the two components can reach the exothermic tem- perature of 70°C. It is recommended to use disposable gloves.

MSDS Hoof Pad

16 file(s) 0

Download

TDS Hoof Pad

7 file(s) 0

Download

L'articolo HOOF PAD proviene da INCHIMICA.

The symmetrical design of SOLETTA allows trimmers to apply the prod- uct on the right or left toe. In order to make the trimmer’s work easier, we marked a “glue side” on the block. The grooves enhance an excellent distribution of the glue on the surface and a minumum quantity of glue, thus to assure the best adhesion to the hoof.

AVAILABLE SIZES:

SOLETTA is available in two symmetrical sizes:

• L120 x W55 x D17 mm
• L120 x W55 x D12 mm

L'articolo Soletta proviene da INCHIMICA.

Working time: 45 seconds at 20°C (68°F)
Colour: transparent

PAD ULTRA SOFT can be applied under a plastic or leather pad, or in association with the product SOLE PROTECT.

Final hardness of this packing material is Shore 20 A, and is recommended to hooves which are sensitive to pressure. It has very good flexibility.It is the softest product in Equimix range.

Shelf life: 12 months

Cartridge opening: break the sealing cap by hand. No need for specific tools. Open and partially used cartridges storage recommendations:
cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.

Storage temperature: 20°C- 30°C.

If the external temperature is lower, the cartridge can be placed with original pla- stic packaging in hot water for some time. Viceversa in case external temperature is warmer, cartridge can be placed with original packaging inside cold water. The chemical reaction between the two components can reach the exothermic tem- perature of 70°C. It is recommended to use disposable gloves.

Shelf life: 12 months

MSDS Ultra Soft Pad

18 file(s) 0

Download

TDS Ultra Soft Pad

7 file(s) 0

Download

L'articolo PAD ULTRA SOFT proviene da INCHIMICA.

Working time: 45 seconds at 20°C (68°F)
Colour: transparent

PAD COMFORT can be applied under a plastic or leather pad or in association with SOLE PROTECT.
Final hardness of this packing material is Shore 40 A, and is recommended to hooves which are sensitive to pressure. It has very good flexibility.

Cartridge opening: break the sealing cap by hand. No need for specific tools.
Open and partially used cartridges storage recommendations:
Cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.

Storage temperature: 20°C- 30°C.

If the external temperature is lower, the cartridge can be placed with original plastic packaging in hot water for some time. Viceversa in case external tempe- rature is warmer, cartridge can be placed with original packaging inside cold water.The chemical reaction between the two components can reach the exothermic temperature of 70°C. It is recommended to use disposable gloves.

Shelf life: 12 months

MSDS Pad Confort

16 file(s) 0

Download

TDS Pad Confort

7 file(s) 0

Download

L'articolo PAD COMFORT proviene da INCHIMICA.

Working time: 45 seconds at 20°C (68°F).
Colour: Black

This product must be applied on a clean and dry sole. External temperature will affect curing time.

This product has the highest hardness in the range (Shore 85 A).
It is highly recommended for sport horses working on hard grounds. It is also suitable for complex orthopedic cases:
• Application on the foot with a very thin layer for a protective purpose.
• Application in two-component with a Hoof Pad Comfort close to the foot covered
with Protect …
• Laminitis application, providing targeted support for the posterior region of the foot.

Shelf life: 12 months

Equimix pour-in pads have very good compatibility to one another and offer a wide ran- ge of applications for fixing foot diseases. Cartridge opening: break the sealing cap by hand. No need for specific tools. Open and partially used cartridges storage recom- mendations: Cut the used mixing tip 1 inch above the connection. The cured product inside the mixing tip will preserve the two components in good liquid conditions.

Storage temperature: 20°C- 30°C.

If the external temperature is lower, the cartridge can be placed with original plastic packaging in hot water for some time. Viceversa in case external temperature is war- mer, cartridge can be placed with original packaging inside cold water. The chemical reaction between the two components can reach the exothermic temperature of 70°C. It is recommended to use disposable gloves.

Shelf life: 12 months

L'articolo SOLE PROTEC proviene da INCHIMICA.